H&R 29255-1 Sport Springs for BMW 5 Series E60 E61

by H&R

E60

$235.50

Buy on Amazon

Key Features

Fits E60 sedan and E61 touring - check variant before ordering
Approx 30mm front and 25mm rear drop on standard suspension models
Progressive spring rate works with factory dampers
H&R TUV-certified - passes German technical inspection standards
Replace worn dampers at install or you will feel every bump
No camber correction included - front alignment needed after fitment

Product Details

Brand: H&R
Category: Lowering Springs
ASIN: B002NV5MOI

Check if it fits your BMW

H&R 29255-1 Sport Springs for BMW 5 Series E60 E61 — Overview

These are H&R's Sport lowering springs for the E60 5 Series sedan and E61 wagon, dropping ride height roughly 1.3 inches up front and 1.1 inches in the rear on most variants. They're a progressive-rate spring, so they work with your factory dampers without hammering you over every expansion joint - a real consideration if the E60 is still a daily driver. H&R sizes these specifically to E60 geometry, so you're not dealing with the coil bind or shock topping-out issues that come with generic fitment springs.

If you're choosing between these and a coilover setup, the Sport springs make more sense if you want a cleaner, lower look without touching your suspension geometry or spending time on corner balancing. They pair well with stock dampers or a Bilstein B6 if yours are worn - which at E60 age they probably are. Not the choice if you're tracking the car or want adjustability, but for a street build that still needs to handle Michigan winters or loaded highway miles, these do the job without drama.