ST Suspension Sport-tech Springs for BMW Z3 E36/7 E36/8
by ST Suspension
Key Features
- Fits BMW Z3 Roadster E36/7 and Coupe E36/8
- Approximate drop of 1.0 to 1.5 inches
- Fixed sport spring setup, not height adjustable
- High-tensile steel spring construction
- Powder-coated finish helps resist corrosion
- Best paired with fresh sport dampers and mounts
Product Details
- Brand
- ST Suspension
- Category
- Lowering Springs
- ASIN
- B007APGB4W
Check if it fits your BMW
ST Suspension Sport-tech Springs for BMW Z3 E36/7 E36/8 — Overview
These are fixed-rate lowering springs for the Z3 Roadster and Coupe, covering E36/7 and E36/8 chassis. ST lists roughly a 1.0 to 1.5 inch drop, which is enough to clean up the stock wheel gap and bring the center of gravity down without turning the car into a slammed project. They are built from high-tensile steel and powder-coated, so they are aimed at street use with some extra cornering control rather than track-only compromises.
I would pick these if your factory springs are tired and you want a lower, tighter setup without jumping straight to coilovers. On a Z3, that usually means less body roll and less fore-aft weight transfer, but your final ride quality still depends heavily on the condition of the shocks and mounts. If your dampers are original, budget for matching sport shocks at the same time, because lowering springs on worn stock dampers usually feels worse, not better.
Other Lowering Springs
Recommended for Your BMW
FAPO PF 32-Level Coilovers for BMW E36 and Z3
FAPO
BFO Z3 Coilovers - Suspension Kit for BMW E36/7 E36/8
BFO
AstraDepot Glossy Black Kidney Grille for BMW Z3 1995-2002
AstraDepot
15mm Hubcentric Wheel Spacers 5x120 for BMW Z3 Z4 E36 E46
StanceMagic
