
H&R 50490-4 Sport Springs for BMW M4 F82 F83
by H&R
Key Features
- Fits F82 M4 coupe and F83 M4 convertible
- Works with factory EDC adaptive dampers - no strut swap needed
- Progressive rate design - softer initial travel, stiffer under load
- Drop is approximately 1.2 inches front and rear
- TUV-certified - retains full street legality in most markets
- Reuse OEM spring perches and bump stops - no extra hardware needed
Product Details
- Brand
- H&R
- Category
- Lowering Springs
- ASIN
- B00C7LY1JQ
Check if it fits your BMW
H&R 50490-4 Sport Springs for BMW M4 F82 F83 — Overview
These are H&R's Sport lowering springs for the F82/F83 M4, dropping the car roughly 1.2 inches front and rear while keeping the factory adaptive dampers in place. No revalving, no coilover conversion - they bolt straight onto the stock EDC struts. If you want a lower stance and sharper turn-in without committing to a full suspension overhaul, this is the sensible middle ground.
One thing worth knowing before you buy - the F82 M4 has a fairly aggressive factory ride height already compared to the F30 M-Sport crowd, so that inch of drop is noticeable but not slammed. I'd budget time for an alignment after install because the camber will shift, especially at the rear. Progressive spring rate means daily driving over rough pavement is tolerable, though anyone expecting coilover crispness will need to adjust expectations.
Other Lowering Springs
Recommended for Your BMW

Feijing Adjustable Coilover Kit — F20 F22 F30 F32 F80 F82
Feijing

Bilstein B8 Performance Rear Shock Absorbers (Pair)
eEuroparts

Whiteline KLC140-255 Heavy Duty Sway Bar Link Assembly
Whiteline

maXpeedingrods Adjustable Sway Bar End Links — Universal 180–230mm
maXpeedingrods
You Might Also Need

MCARCAR KIT Carbon Fiber Front Lip Splitter — F80 M3 / F82 F83 M4
MCARCAR KIT

Cuztom Tuning V-Style Carbon Fiber Front Splitter — F80 M3 / F82 F83 M4
Cuztom Tuning

Tempsnow Carbon Fiber Look Front Lip Splitter — F80 M3 / F82 F83 M4
Tempsnow

NeespoC Polyurethane Front Lip Splitter — F80 M3 / F82 F83 M4
NeespoC



