H&R Lowering Springs for BMW 3 Series E91 Touring and E92 Coupe 4WD

by H&R

E91 E92

$483.89

Buy on Amazon

Key Features

Fits E91 Touring xDrive and E92 Coupe xDrive from 2005
25-35mm front drop, 10-20mm rear drop - xDrive-specific rates
Progressive spring rate works with stock dampers
Will not fit RWD E90, E91, E92 - separate H&R part numbers for those
Rear drop intentionally modest to suit xDrive weight distribution
Check front strut bumpstop length before install to avoid contact

Product Details

Brand: H&R
Category: Lowering Springs
ASIN: B002NUW9YK

Check if it fits your BMW

H&R Lowering Springs for BMW 3 Series E91 Touring and E92 Coupe 4WD — Overview

These are H&R's sport springs for the xDrive variants of the E9x generation - specifically the E91 Touring and E92 Coupe with all-wheel drive, built from 2005 onward. Drop is 25-35mm up front and 10-20mm at the rear, which is a deliberately conservative rear figure to account for the xDrive transfer case weight and the fact that these cars already sit a touch lower in the back than their RWD siblings. H&R rates these as a direct OEM replacement format, meaning they work with your factory dampers without needing a valving change, though worn shocks will feel worse not better once the spring rate goes up.

If you are on the RWD E92 or E90 sedan, these are not your springs - H&R makes separate part numbers for those. The xDrive-specific geometry matters here and mixing them up is a real mistake people make when ordering. For track use or if you want more than 35mm, you are looking at H&R coilovers instead, but for a daily-driven Touring or weekend Coupe where you want a cleaner stance without destroying ride quality, this is the sensible choice over cheap eBay springs that lose their rate within a year.