BMW 7 G70 Turbo Upgrade Kits

If you're running a stock turbo on your F80 M3, N54-powered 335i, or B58-equipped M340i and you've hit the ceiling on what a tune alone can deliver, a turbo upgrade kit is the logical next step. Done properly, a larger or upgraded turbo transforms your BMW's power curve without sacrificing daily drivability. Done wrong, it grenades your motor. Here's what you actually need to know before you buy.

The most popular platforms for turbo upgrades are the E82/E90/E92 with the N54 (the twin-turbo inline-six that responds to upgrades almost embarrassingly well), the F-chassis S55 in the M3/M4, and increasingly the B58 in F30/G20 M340i and F87 M2 Competition. For N54 builds, brands like Vargas Turbo Technologies (VTT) and BMS (Burger Motorsports) offer staged upgrade paths - from bolt-on hybrids that retain your stock location all the way to full big-turbo kits pushing 600+ whp. VTT's GC lineup in particular is a proven choice for street/track builds that don't want to sacrifice spool.

For S55 platforms (F80/F82/F83 M3/M4, chassis codes F80, F82, F83), the factory twin-scroll turbos are competent but leave room on the table. Pure Turbos dominates this space with their PURE Stage 1 and Stage 2 upgrades - drop-in replacements using billet compressor wheels that extract serious gains with minimal supporting modifications. Stage 2 units push comfortably past 600 whp on supporting bolt-ons and a proper tune. On the B58, Topend Motorsports and RK Autowerks offer hybrid solutions that work within the stock location manifold - critical for maintaining factory emissions compliance in street builds.

First, match the turbo to your build goals and supporting mods. A Stage 2 turbo on a stock fueling system is a recipe for lean conditions and detonation. Before any turbo upgrade, you need upgraded high-pressure fuel pump (HPFP) internals or an auxiliary fuel system, a charge pipe kit to handle elevated boost pressure, and an ethanol-capable tune from a reputable tuner like MHD, BM3, or Bootmod3. Check our Fueling Upgrades section for HPFP kits and upgraded injectors compatible with your build.

Avoid no-name kits off Amazon or generic eBay turbos spec'd vaguely as "fits BMW 3 Series." Turbocharger fitment is chassis and engine specific - an N55 and N54 are not interchangeable, and neither are their turbo hardware interfaces. Look for kits that include all hard lines, gaskets, charge pipes, and updated oil feed/return lines. A quality kit from VTT or Pure will cost more upfront but ships as a complete system with documented install instructions and real tech support.

Install difficulty is legitimately intermediate to advanced. On the N54, expect a full day in the garage minimum - the twin turbos sit deep in the valley of the engine bay and require significant disassembly. The S55 is more accessible but still demands proper torque specs on the exhaust manifold studs (cross-thread one and your day gets much longer). If you're not comfortable working with turbo oil lines and heat shielding, factor in shop labor. Pair this with upgraded intercoolers and charge piping to handle the increased heat load your new turbos will generate - this is not optional on anything beyond a modest Stage 1 upgrade.

Bottom line: a quality turbo upgrade kit on the right platform is one of the best dollar-per-horsepower investments you can make on a BMW. Stick to proven brands, build the fueling and cooling system to match, and get a proper tune from someone who specializes in your specific ECU and engine combination. The gains are real - just don't shortcut the supporting work.